-
Dry spray on painted components
Formation of dry powders on painted componets results poor finish. Remedies Avoid fast evapoating solvents in the spray thinners. Avoid spraying under hot sun. Mix some retarder thinner with spray…
-
Formulation Disclaimer
Any information given is, to the best of my knowledge, the best currently available, with respect to my products and their use, but it is subject to revision as additional…
-
-
Rusting in open yard
Rusing is a natural phenomenon of a metal forming metal oxide layer on its surface. Two factors are essential for the formation of rusting of a metal. One is oxygen…
-
Metal Pretreatment Chemicals
Metal Pretreatment Chemicals 1) Pre-degreasing chemicals 2) Alkaline degreasing chemicals 3) Rust remover 4) Paint strippers 5) Trication phosphating chemicals 6) Calcium modified zinc phosphate coating chemicals 7) Accelerators 8)…
-
Lab stirrer
Homogeneity is very important in any paint mixture. Before painting the components, the paint should be throughly mixed. In large scale production the painter may use lab stirrer for better…
-
Thermal pen
Thermal crayon pens are very much used in industries. It is used to indicate the body temperature of components or products especially in any conveyor system or in oven where…
-
Water finding paste
Water is sometimes deterimental especially in oil based paint shops. Air line is the primary source of water in a spry booth. Water should be completely drained off from the…
