-
Dry spray on painted components
Formation of dry powders on painted componets results poor finish. Remedies Avoid fast evapoating solvents in the spray thinners. Avoid spraying under hot sun. Mix some retarder thinner with spray thinner. If it is ordinary air drying alkyd based enamel add a few drops of pine oil. It stops fast evaporation. If it is NC…
-
Formulation Disclaimer
Any information given is, to the best of my knowledge, the best currently available, with respect to my products and their use, but it is subject to revision as additional knowledge and experience is gained. Such information is offered as a guideline for experimentation only and is not to be construed as a representation that…
-
Protected: Formulation for acidic degreaser
There is no excerpt because this is a protected post.
-
Rusting in open yard
Rusing is a natural phenomenon of a metal forming metal oxide layer on its surface. Two factors are essential for the formation of rusting of a metal. One is oxygen present in air and the other one is water or humidity present in atmosphere. How can it be prevented? Newly formed metal sheets are duly…
-
Metal Pretreatment Chemicals
Metal Pretreatment Chemicals 1) Pre-degreasing chemicals 2) Alkaline degreasing chemicals 3) Rust remover 4) Paint strippers 5) Trication phosphating chemicals 6) Calcium modified zinc phosphate coating chemicals 7) Accelerators 8) Three-in-one solution 9) Iron phosphate coating chemicals 10) Passivation chemicals 11) Nano-ceramic coating chemicals
