Acid curing matt clear for wood formulation

Here is a Two-Pack Acid-Cured Urea-Formaldehyde Alkyd Matt Clear Formulation, optimized for wood surfaces where a soft, elegant, non-reflective finish is desired – e.g., modern furniture, architectural woodwork, and flooring.


Matt Clear For Wood – Two-Pack System

🎨 Pack A – Base (Matt Resin Component)

Raw MaterialFunction% by weight
Short Oil Alkyd Resin (50–60% solids)Film former25.0
Urea-Formaldehyde Resin (60% solids)Crosslinker20.0
Butylated Melamine ResinToughness / Hardness enhancer5.0
Butyl AcetateSolvent10.0
IsobutanolFlow & co-solvent5.0
Matt Agent (e.g. Silica, 5–7 µm)Matting, gloss reduction7.0
Wax Dispersion (optional)Scratch resistance, soft feel1.0
Silicone Leveling AgentFlow modifier0.3
Polyurethane-compatible DefoamerFoam control0.3
Cellulose Acetobutyrate (CAB)Flow & leveling support1.5
Xylene or Aromatic 150Viscosity adjusterTo 100%

⚗️ Pack B – Catalyst (Acid Component)

Raw MaterialFunction% by weight
p-Toluenesulfonic Acid (10% in IPA)Acid catalyst10.0
Isopropyl AlcoholSolvent carrier90.0

⚙️ Mixing & Application

  • Mixing Ratio (A:B) → 100:7 by weight
  • Pot Life → ~6 hours at 25°C
  • Application → Spray recommended (air or airless); brushing may leave marks in matt finishes
  • Viscosity → ~40–60 seconds Ford Cup #4
  • Drying Schedule:
    • Touch dry: 30–45 min
    • Hard dry: 8–12 hours
    • Full cure: 5–7 days

🔍 Key Performance Parameters

PropertyValue / Range
Gloss @ 60°15–25 GU (adjustable)
HardnessH–2H (pencil hardness)
AdhesionExcellent (on wood)
Chemical ResistanceGood – water/alcohol
Scratch ResistanceGood (with wax additive)
ClaritySlightly opalescent due to matting agent

🎯 Adjustments You Can Make

  • Lower gloss further? → Increase silica matting agent to 9–10%, but watch for haze.
  • More scratch resistance? → Add micronized polypropylene wax or silica-wax blends.
  • For better clarity? → Use fumed silica or surface-treated silica at smaller particle size (~3–5 µm).
  • Water white finish? → Choose low-yellowing alkyds and melamine resins.

For further details contact Dr E. Ramanathan, WhatsApp 9444929163, email: eramanath@gmail.com

Leave a Reply

wpChatIcon